secubox-openwrt/package/secubox/secubox-app-tor/files/etc/init.d/tor-shield

#!/bin/sh /etc/rc.common
# SecuBox Tor Shield - Tor anonymization service
# Copyright (C) 2025 CyberMind.fr

START=95
STOP=10
USE_PROCD=1

PROG=/usr/sbin/torctl
CONFIG=tor-shield
TORRC=/var/run/tor/torrc
TOR_DATA=/var/lib/tor
TOR_RUN=/var/run/tor

. /lib/functions.sh

generate_torrc() {
	local enabled mode dns_over_tor socks_port socks_addr trans_port dns_port
	local bridges_enabled bridge_type exit_nodes exclude_exit_nodes strict_nodes

	config_load "$CONFIG"
	config_get enabled main enabled '0'
	config_get mode main mode 'transparent'
	config_get dns_over_tor main dns_over_tor '1'

	config_get socks_port socks port '9050'
	config_get socks_addr socks address '127.0.0.1'

	config_get trans_port trans port '9040'
	config_get dns_port trans dns_port '9053'

	config_get bridges_enabled bridges enabled '0'
	config_get bridge_type bridges type 'obfs4'

	config_get exit_nodes security exit_nodes ''
	config_get exclude_exit_nodes security exclude_exit_nodes ''
	config_get strict_nodes security strict_nodes '0'

	mkdir -p "$TOR_RUN" "$TOR_DATA"

	# Clean up stale files that may have wrong ownership
	rm -f "$TOR_RUN/tor.pid" "$TOR_RUN/control" "$TOR_RUN/control_auth_cookie" 2>/dev/null
	rm -f "$TOR_DATA/lock" 2>/dev/null

	chown tor:tor "$TOR_RUN" "$TOR_DATA"
	chmod 700 "$TOR_RUN" "$TOR_DATA"

	cat > "$TORRC" << EOF
# SecuBox Tor Shield - Auto-generated config
# Do not edit - managed by tor-shield

User tor
DataDirectory $TOR_DATA
Log notice syslog
ControlSocket $TOR_RUN/control
ControlSocketsGroupWritable 1
CookieAuthentication 1
CookieAuthFile $TOR_RUN/control_auth_cookie
CookieAuthFileGroupReadable 1

# SOCKS proxy
SocksPort $socks_addr:$socks_port
SocksPolicy accept 127.0.0.1
SocksPolicy accept 192.168.0.0/16
SocksPolicy accept 10.0.0.0/8
SocksPolicy reject *
EOF

	# Transparent proxy mode
	if [ "$mode" = "transparent" ]; then
		cat >> "$TORRC" << EOF

# Transparent proxy
TransPort 0.0.0.0:$trans_port
EOF
	fi

	# DNS over Tor
	if [ "$dns_over_tor" = "1" ]; then
		cat >> "$TORRC" << EOF

# DNS over Tor
DNSPort 0.0.0.0:$dns_port
AutomapHostsOnResolve 1
AutomapHostsSuffixes .onion,.exit
VirtualAddrNetworkIPv4 10.192.0.0/10
EOF
	fi

	# Bridge configuration - only enable if bridges are configured
	if [ "$bridges_enabled" = "1" ]; then
		# Count bridge lines first
		BRIDGE_COUNT=0
		count_bridge() { BRIDGE_COUNT=$((BRIDGE_COUNT + 1)); }
		config_list_foreach bridges bridge_lines count_bridge

		# Only add UseBridges if there are actual bridges configured
		if [ "$BRIDGE_COUNT" -gt 0 ]; then
			cat >> "$TORRC" << EOF

# Bridge mode
UseBridges 1
EOF
			# Add bridge lines from config
			config_list_foreach bridges bridge_lines add_bridge_line
		fi
	fi

	# Exit node restrictions
	if [ -n "$exit_nodes" ]; then
		echo "ExitNodes $exit_nodes" >> "$TORRC"
	fi
	if [ -n "$exclude_exit_nodes" ]; then
		echo "ExcludeExitNodes $exclude_exit_nodes" >> "$TORRC"
	fi
	if [ "$strict_nodes" = "1" ]; then
		echo "StrictNodes 1" >> "$TORRC"
	fi

	# Hidden services
	config_foreach add_hidden_service hidden_service

	# GeoIP files
	if [ -f /usr/share/tor/geoip ]; then
		echo "GeoIPFile /usr/share/tor/geoip" >> "$TORRC"
	fi
	if [ -f /usr/share/tor/geoip6 ]; then
		echo "GeoIPv6File /usr/share/tor/geoip6" >> "$TORRC"
	fi

	# Ensure torrc is readable by tor user
	chown tor:tor "$TORRC"
}

add_bridge_line() {
	echo "Bridge $1" >> "$TORRC"
}

add_hidden_service() {
	local cfg="$1"
	local enabled name local_port virtual_port

	config_get enabled "$cfg" enabled '0'
	[ "$enabled" = "1" ] || return

	config_get name "$cfg" name "hidden_$cfg"
	config_get local_port "$cfg" local_port '80'
	config_get virtual_port "$cfg" virtual_port '80'

	local hs_dir="$TOR_DATA/hidden_service_$name"
	mkdir -p "$hs_dir"
	chown tor:tor "$hs_dir"
	chmod 700 "$hs_dir"

	cat >> "$TORRC" << EOF

# Hidden Service: $name
HiddenServiceDir $hs_dir
HiddenServicePort $virtual_port 127.0.0.1:$local_port
EOF
}

setup_iptables() {
	local mode trans_port dns_port dns_over_tor kill_switch wan_input_allow

	config_load "$CONFIG"
	config_get mode main mode 'transparent'
	config_get kill_switch main kill_switch '1'
	config_get dns_over_tor main dns_over_tor '1'
	config_get wan_input_allow main wan_input_allow '0'
	config_get trans_port trans port '9040'
	config_get dns_port trans dns_port '9053'

	# Get Tor user ID
	local tor_uid=$(id -u tor 2>/dev/null || echo "tor")

	# Remove from chains first (to allow chain deletion)
	iptables -t nat -D OUTPUT -j TOR_SHIELD 2>/dev/null
	iptables -t filter -D OUTPUT -j TOR_SHIELD 2>/dev/null
	iptables -t nat -D PREROUTING -i br-lan -j TOR_SHIELD_LAN 2>/dev/null

	# Clear existing Tor rules
	for chain in TOR_SHIELD TOR_SHIELD_LAN; do
		iptables -t nat -F $chain 2>/dev/null
		iptables -t nat -X $chain 2>/dev/null
	done
	iptables -t filter -F TOR_SHIELD 2>/dev/null
	iptables -t filter -X TOR_SHIELD 2>/dev/null

	# Clean up nftables rules for server mode
	cleanup_nftables_wan

	[ "$mode" = "transparent" ] || return 0

	# Create chains (ignore "already exists" errors)
	iptables -t nat -N TOR_SHIELD 2>/dev/null || true
	iptables -t filter -N TOR_SHIELD 2>/dev/null || true

	# Exclude Tor traffic
	iptables -t nat -A TOR_SHIELD -m owner --uid-owner $tor_uid -j RETURN

	# Exclude local networks
	config_list_foreach trans excluded_ips add_excluded_ip

	# Exclude domains (resolve to IP and bypass Tor)
	config_list_foreach trans excluded_domains add_excluded_domain

	# Redirect DNS if enabled
	if [ "$dns_over_tor" = "1" ]; then
		iptables -t nat -A TOR_SHIELD -p udp --dport 53 -j REDIRECT --to-ports $dns_port
		iptables -t nat -A TOR_SHIELD -p tcp --dport 53 -j REDIRECT --to-ports $dns_port
	fi

	# Redirect TCP to transparent proxy
	iptables -t nat -A TOR_SHIELD -p tcp -j REDIRECT --to-ports $trans_port

	# Add to OUTPUT chain
	iptables -t nat -A OUTPUT -j TOR_SHIELD

	# Kill switch - block non-Tor traffic
	if [ "$kill_switch" = "1" ]; then
		iptables -t filter -A TOR_SHIELD -m owner --uid-owner $tor_uid -j ACCEPT
		iptables -t filter -A TOR_SHIELD -d 127.0.0.0/8 -j ACCEPT
		config_list_foreach trans excluded_ips add_excluded_filter_ip
		config_list_foreach trans excluded_domains add_excluded_domain_filter
		# Allow response packets for inbound connections (HAProxy, etc)
		iptables -t filter -A TOR_SHIELD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT
		iptables -t filter -A TOR_SHIELD -j REJECT
		iptables -t filter -A OUTPUT -j TOR_SHIELD
	fi

	# Server mode: Allow WAN inbound traffic (for published services)
	if [ "$wan_input_allow" = "1" ]; then
		setup_nftables_wan_allow
	fi

	# LAN client Tor routing via PREROUTING
	setup_lan_proxy
}

# nftables helpers for server mode WAN access
cleanup_nftables_wan() {
	# Remove any previous tor-shield nftables rules
	if command -v nft >/dev/null 2>&1; then
		nft delete chain inet fw4 tor_shield_wan_in 2>/dev/null || true
	fi
}

setup_nftables_wan_allow() {
	# Server mode: Ensure WAN inbound is allowed
	# This creates nftables rules to allow inbound connections from WAN
	# Works with OpenWrt firewall4 (nftables-based)

	if ! command -v nft >/dev/null 2>&1; then
		echo "Warning: nft command not found, WAN input rules may not apply"
		return 1
	fi

	# Check if fw4 table exists (OpenWrt firewall4)
	if ! nft list table inet fw4 >/dev/null 2>&1; then
		echo "Note: fw4 table not found, using legacy firewall"
		return 0
	fi

	# Create chain for Tor Shield WAN input if not exists
	nft add chain inet fw4 tor_shield_wan_in 2>/dev/null || true

	# Allow all established/related (responses to outgoing)
	nft add rule inet fw4 tor_shield_wan_in ct state established,related accept 2>/dev/null || true

	# Allow new inbound on common service ports (HAProxy, HTTPS, HTTP)
	# These are the ports typically used for published services
	nft add rule inet fw4 tor_shield_wan_in tcp dport 80 accept 2>/dev/null || true
	nft add rule inet fw4 tor_shield_wan_in tcp dport 443 accept 2>/dev/null || true
	nft add rule inet fw4 tor_shield_wan_in tcp dport 8443 accept 2>/dev/null || true

	# Hook into input_wan chain (before drop)
	# First remove any existing jump to avoid duplicates
	nft delete rule inet fw4 input_wan jump tor_shield_wan_in 2>/dev/null || true
	# Add jump at the beginning of input_wan
	nft insert rule inet fw4 input_wan jump tor_shield_wan_in 2>/dev/null || true

	echo "Server mode: WAN inbound allowed on ports 80, 443, 8443"
}

add_excluded_ip() {
	iptables -t nat -A TOR_SHIELD -d "$1" -j RETURN
}

add_excluded_filter_ip() {
	iptables -t filter -A TOR_SHIELD -d "$1" -j ACCEPT
}

add_excluded_lan_ip() {
	iptables -t nat -A TOR_SHIELD_LAN -d "$1" -j RETURN
}

# Resolve domain to IP and exclude from Tor routing
add_excluded_domain() {
	local domain="$1"
	[ -z "$domain" ] && return

	# Resolve IPv4 addresses using nslookup (available on OpenWrt)
	local ips=$(nslookup "$domain" 2>/dev/null | tail -n+3 | grep "Address" | awk '{print $2}' | grep -E '^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$')

	if [ -n "$ips" ]; then
		for ip in $ips; do
			iptables -t nat -A TOR_SHIELD -d "$ip" -j RETURN
			logger -t tor-shield "Excluded domain $domain -> $ip"
		done
	else
		logger -t tor-shield "Warning: Could not resolve domain $domain"
	fi
}

add_excluded_domain_filter() {
	local domain="$1"
	[ -z "$domain" ] && return

	local ips=$(nslookup "$domain" 2>/dev/null | tail -n+3 | grep "Address" | awk '{print $2}' | grep -E '^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$')

	for ip in $ips; do
		iptables -t filter -A TOR_SHIELD -d "$ip" -j ACCEPT
	done
}

setup_lan_proxy() {
	local lan_proxy
	config_get lan_proxy trans lan_proxy '0'
	[ "$lan_proxy" = "1" ] || return 0

	local trans_port dns_port dns_over_tor
	config_get trans_port trans port '9040'
	config_get dns_port trans dns_port '9053'
	config_get dns_over_tor main dns_over_tor '1'

	# Create PREROUTING chain
	iptables -t nat -N TOR_SHIELD_LAN 2>/dev/null || true

	# Exclude local destinations
	config_list_foreach trans excluded_ips add_excluded_lan_ip

	# Redirect DNS
	if [ "$dns_over_tor" = "1" ]; then
		iptables -t nat -A TOR_SHIELD_LAN -p udp --dport 53 -j REDIRECT --to-ports $dns_port
		iptables -t nat -A TOR_SHIELD_LAN -p tcp --dport 53 -j REDIRECT --to-ports $dns_port
	fi

	# Redirect TCP to Tor
	iptables -t nat -A TOR_SHIELD_LAN -p tcp -j REDIRECT --to-ports $trans_port

	# Apply to LAN interface
	iptables -t nat -A PREROUTING -i br-lan -j TOR_SHIELD_LAN
}

remove_iptables() {
	# Remove from chains
	iptables -t nat -D OUTPUT -j TOR_SHIELD 2>/dev/null
	iptables -t filter -D OUTPUT -j TOR_SHIELD 2>/dev/null
	iptables -t nat -D PREROUTING -i br-lan -j TOR_SHIELD_LAN 2>/dev/null

	# Flush and remove all chains
	for chain in TOR_SHIELD TOR_SHIELD_LAN; do
		iptables -t nat -F $chain 2>/dev/null
		iptables -t nat -X $chain 2>/dev/null
	done
	iptables -t filter -F TOR_SHIELD 2>/dev/null
	iptables -t filter -X TOR_SHIELD 2>/dev/null

	# Clean up nftables rules for server mode
	cleanup_nftables_wan
}

start_service() {
	local enabled

	config_load "$CONFIG"
	config_get enabled main enabled '0'

	[ "$enabled" = "1" ] || {
		echo "Tor Shield is disabled. Enable with: uci set tor-shield.main.enabled=1"
		return 0
	}

	# Generate torrc
	generate_torrc

	# Setup iptables rules
	setup_iptables

	# Start Tor via procd
	procd_open_instance tor
	procd_set_param command /usr/sbin/tor -f "$TORRC"
	procd_set_param respawn 3600 5 5
	procd_set_param stdout 1
	procd_set_param stderr 1
	procd_set_param pidfile "$TOR_RUN/tor.pid"
	procd_close_instance
}

stop_service() {
	# Remove iptables rules
	remove_iptables

	# Kill tor process
	if [ -f "$TOR_RUN/tor.pid" ]; then
		kill $(cat "$TOR_RUN/tor.pid") 2>/dev/null
		rm -f "$TOR_RUN/tor.pid"
	fi
}

service_triggers() {
	procd_add_reload_trigger "$CONFIG"
}

reload_service() {
	stop
	start
}

restart_service() {
	stop
	start
}

status() {
	"$PROG" status
}