- Replace per-site UCI calls with single-pass awk parsing
- Pre-fetch listening ports, HAProxy backends, and Tor services
- Fix getline variable corruption that produced invalid JSON
- Reduce execution time from 30+ seconds to 0.23 seconds
- Update signaling.gk2.secubox.in route to port 8083 (LXC)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add auto-republish to method_upload_file (was only in upload_finalize)
- Add Gitea push to cmd_publish when gitea.enabled=1
- Use haproxyctl reload instead of init.d (container-aware)
- Uploaded content now triggers full republish flow for emancipated sites
This fixes the issue where uploading new HTML content didn't update
the live site because republish wasn't triggered.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When MetaBlogizer creates HAProxy vhosts, it routes through mitmproxy_inspector
for WAF inspection. However, mitmproxyctl sync-routes needs the original_backend
field to determine where to forward traffic after WAF inspection.
Without original_backend, sites would return 404 after upload because mitmproxy
had no route to forward traffic to the actual backend.
This fix adds original_backend=$backend_name to all 3 vhost creation locations:
- method_create_site (line 491)
- method_emancipate_site (line 1210)
- method_upload_and_create_site (line 2001)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Upload workflow now works without needing to unpublish/expose again.
The reload_haproxy() function now calls mitmproxyctl sync-routes to
ensure mitmproxy picks up new routes immediately after vhost creation.
Root cause: Upload created HAProxy vhost and mitmproxy route file entry,
but mitmproxy never received a reload signal to activate the route.
Running emancipate fixed it because it called mitmproxyctl sync-routes.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- metablogizer: reload_haproxy() now copies config to /etc/haproxy.cfg
- haproxyctl: generate_config() syncs to /etc/haproxy.cfg after generation
- Fixes issue where newly uploaded sites return 404 because HAProxy
reads config from /etc/haproxy.cfg but config was only generated to
/srv/haproxy/config/haproxy.cfg
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Sites on *.gk2.secubox.in were failing because HAProxy couldn't match
the SNI to the correct certificate. New add_haproxy_cert() helper:
- Extracts base domain from subdomain
- Creates UCI cert entry mapping domain to wildcard cert file
- Applied to all vhost creation paths (create, upload, republish)
Sites now work immediately after one-click deploy without manual
certificate configuration.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Replace fragile sed-based JSON manipulation with Python for adding
mitmproxy routes. The new add_mitmproxy_route() helper function:
- Updates both /srv/mitmproxy/ and /srv/mitmproxy-in/ routes files
- Uses proper JSON parsing instead of string substitution
- Ensures sites are immediately accessible after one-click deploy
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When editing a site and changing its domain, automatically:
- Remove the old HAProxy vhost for the previous domain
- Create a new vhost for the new domain with priority=50
- Regenerate and reload HAProxy configuration
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
New package secubox-app-talk-hpb:
- Docker-based signaling server and Janus WebRTC gateway
- Auto-generates TURN/SIGNALING/INTERNAL secrets
- Creates HAProxy vhost with SSL/ACME
- STUN/TURN server with UDP+TCP support
- CLI tool: talk-hpbctl setup/status/test/logs
Hub generator v5:
- Add PeerTube videos with thumbnails and duration badges
- Fix Streamlit instance detection (=instance vs =app)
- Total count now: sites + streamlit + videos
MetaBlogizer fix:
- Add priority=50 to new vhosts to prevent wildcard catch
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Both create_site_from_upload and upload_and_create_site were missing
HAProxy vhost creation step (step 8 from create_site method).
Changes:
- Add vhost creation with backend=mitmproxy_inspector for WAF routing
- Add mitmproxy route to /srv/mitmproxy-in/haproxy-routes.json
- Apply same fix to original create_site method for consistency
This ensures all MetaBlogizer uploaded sites are immediately accessible
via HTTPS and all traffic passes through WAF inspection.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add create_site_from_upload RPC method for chunked site creation
- Modify JS api to auto-chunk files >40KB (ubus message size limit)
- Upload chunks sequentially via upload_chunk, then finalize with
create_site_from_upload
- Add no_cache vhost option to haproxyctl for cache-control headers
- Fix large file upload failures caused by shell argument size limits
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add upload_and_create_site: one-click deploy with auto HAProxy setup
- Add unpublish_site: remove HAProxy vhost while preserving content
- Add set_auth_required: toggle authentication requirement per site
- Add get_sites_exposure_status: exposure/cert status for all sites
- Simplify dashboard to KISS UI pattern with status badges
- Action buttons: Share, Upload, Expose/Unpublish, Lock/Unlock, Delete
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- metablogizer: Use network.lan.ipaddr instead of 127.0.0.1 for server address
- service-registry: Same fix for emancipate function
- hexojs: Same fix for HAProxy backend creation
- gotosocial: Switch from LXC to direct execution mode
- v0.18.0 has cgroup bugs, using v0.17.0 instead
- Remove LXC container dependency
- Use /srv/gotosocial for binary and data
- Add proper PID file management
The HAProxy container cannot reach 127.0.0.1 on the host, so all HAProxy
backend servers must use the LAN IP (typically 192.168.255.1).
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add automatic Gitea push after upload_finalize in Streamlit RPCD
- Add automatic Gitea push after upload_finalize in MetaBlogizer RPCD
- Fix MetaBlogizer to use site name instead of UCI section ID for push
- Fix metablogizerctl to read Gitea config from dedicated gitea section
Uploaded files via LuCI are now automatically synced to Gitea repos.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add Emancipate button to dashboard sites table
- Implement async RPC with job polling to avoid XHR timeout
- Add emancipate + emancipate_status RPCD methods
- Add ACL permissions for new RPC methods
- Change HAProxy reload to restart for clean state
- Document RPCD ACL requirements in CLAUDE.md
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Replace overview.js with dashboard.js using standard cbi-* classes
- Add api.js module for RPC declarations
- Show port, runtime, backend_running status in sites table
- Add sync_config, discover_vhosts, import_vhost RPC methods
- Update ACL with new method permissions
- Menu: Sites -> Dashboard
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When a site's DNS doesn't point to our public IP, skip the external
HTTP check to avoid 5-second timeouts. This significantly speeds up
the get_hosting_status API call which was causing XHR timeouts in
the LuCI frontend.
Sites with DNS mismatch now show frontend_status: "dns_mismatch"
instead of timing out.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add mDNS service announcement via avahi-publish for _secubox._tcp
- Add REST API endpoints on port 7331 (/api/peers, /api/status, /api/services)
- Add node self-registration to ensure local node visible in mesh view
- Add UCI defaults for uhttpd P2P API instance and firewall rules
- Bump secubox-p2p version to 0.2.0
fix(vhost-manager): Fix uninitialized variable syntax errors
- Add 'local' keyword to variable declarations on lines 606, 621, 693
fix(metablogizer,service-registry): Add HAProxy availability fallback
- Add haproxy_available() helper to check if HAProxy is running
- Gracefully skip HAProxy operations when service unavailable
- Store pending HAProxy config for later when service becomes available
- Prevent crashes when HAProxy container is stopped
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Set umask 022 before file operations
- chmod 644 immediately after base64 decode
- chmod 755 on site_path after each upload
- Prevents 403 Forbidden from restrictive permissions
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Dynamic .onion address generation for hosted sites:
- enable_tor: Create Tor hidden service for a site
- disable_tor: Remove Tor hidden service
- get_tor_status: Get Tor status for all sites
- Sites now include onion_address and onion_url in listings
When enabled, sites are accessible via both:
- Public domain (https://domain.com)
- Tor hidden service (http://xxx.onion)
Also includes DNS resolution fix using Google DNS API.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
KISS approach to DNS resolution:
1. Primary: Use Google DNS API (https://dns.google/resolve)
- Most reliable, bypasses local resolver issues
2. Fallback: nslookup with tail -1 to skip DNS server line
3. Fallback: host command
The bug was parsing nslookup output which includes DNS server
address (127.0.0.1) before the actual resolved IP.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Update local-build.sh to remove libc from Packages index
- Prevents opkg architecture mismatch errors on install
- Regenerate secubox-feed with 74 packages
- Update RPCD scripts for lyrion, mailinabox, metablogizer, nextcloud
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add reload_haproxy() helper function for consistent reloads
- Use 127.0.0.1 for uhttpd backend address instead of 192.168.255.1
- Call fix_permissions() on upload_file to ensure correct file access
- Update delete_site to use reload_haproxy helper
- Bump PKG_RELEASE to 3
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
New luci-app-metablogizer package replacing metabolizer with simplified
static site publishing:
- RPCD backend with create/delete/sync site methods
- Auto HAProxy vhost creation with SSL/ACME
- Nginx LXC container integration for serving static files
- Git sync from Gitea repositories
- QR code generation for published URLs
- Social share buttons (Twitter, LinkedIn, Facebook, Telegram, WhatsApp, Email)
- Drag-and-drop file upload UI
- SecuBox light theme styling
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
